2.2 Rear Panel
1. LNB IN:Connect the satellite antenna cable.
2. IR_EX: It displays channel information. In standby mode it displays local
time.
3. USB2.0: USB 2.0 Host Port.
4. RS232: Connect to the computer using serial line.
5. DV-OUT: Connect to the TV using an HDMI cable.
6. AV: Connect to the TV using the AV cable
7. LAN: Connect to internet using an Ethernet cable.
8. DC-12V: Connect to the power.
To Next Page
Loading...
Need help?
General
