11
This brings the monitor display to the rst
setup screen: time.
Setting the Time, Date, and Beeper
MODES SCREEN DISPLAY
Hour (Flashing) “10”:00“
AM
”
Minutes (Flashing) 10:”55”
AM
Year(Flashing) 12-28“2006”
Month (Flashing) “12”-28 2006
Day (Flashing) 12-”28” 2006
Sample Marking (ON or OFF) “ON”
Beep (ON or OFF) “ON”
END (End of Setup Mode) “END”
2. Repeatedly press the MODE button to nd the MODE
you want to change.
3. Press the left/right arrow buttons to choose a
new setting for that MODE.
4. Press the MODE button to select the new settings or to
skip to the next MODE.
To Next Page
Loading...
