18
Testing a Blood Sample
5. Use a lancing device, loaded with a new
lancet, to puncture the nger. (See lancing
device instructions for use.)
6. Squeezethengertoformadropofblood.
7. Touch the end of the test strip to the blood
drop until the test strip is full and the on-
screen countdown timer begins.
(Beeper sounds if enabled.)
NOTE: The Blood Drop symbol ashes on and o repeatedly until suf-
cient blood has been added to the test strip.
8. A countdown on screen appears while test is in progress.
Glucose result is available on-screen in 5 seconds.
9. The result is automatically stored into memory.
10. Press the Left/Right
buttons
to move between marked (√) or unmarked
results. Marked results are not included in
the average test results.
11. Press the Mode button to save the Marking Status:
Marked (√) or Unmarked.
To Next Page
Loading...
