27
4. To review 1 day, 7 day, 14 day, and 30 day average results,
press the Mode button.
5. If there are less than 2 test results in memory, the screen dis-
plays 000. If no results, the screen displays 3 dashes.
6. After reviewing the 30 day average, press the Mode
button to shut o the monitor, or press no buttons and the
monitor will turn o automatically after 30 seconds.
NOTE: When the monitor memory is full (400 test results), each new
test result stored in memory will remove the oldest test result stored
in memory.
Data Review in Memory
To Next Page
Loading...
