Need help?Do you have a question about the Novar lingo and is the answer not in the manual?
Details safety requirements and compliance with UL 916 and C22.2 standards for installations in the US and Canada.
Covers FCC and Industry Canada compliance for digital apparatus, addressing radio noise emissions and potential interference.
States limitations of liability, trademarks, copyright, and warranty information for the manual and product.
Lists the CUL/UL and CSA certifications and standards the Lingo device complies with for safe operation.
Specifies the voltage (24 VAC, Class 2) and power consumption (40 VA) requirements for the Lingo unit.
Details the specifications for analog inputs (4-20 mA), digital inputs (contact closure), and fault outputs (24 VAC/VDC, 2A).
Outlines the acceptable temperature range (32°F-140°F) and humidity (0-95% noncondensing) for the Lingo.
Provides the physical measurements (height, width, depth) and weight (5.85 lb) of the Lingo electronics assembly.
Lists essential safety measures, electrical code adherence, and dedicated transformer use during Lingo installation.
Explains how to set a unique address for each Lingo module on the LAN using DIP switches, noting the offset from the Unit number.
Provides a step-by-step guide for physically mounting the Lingo electronics assembly onto the baseplate using provided hardware.
Details the requirements for a telephone interface jack (RJ-11C) and procedure for connecting the Lingo via telephone cable.
Describes methods for checking the Lingo installation locally using a touchscreen or PC software via RS-232 or Ethernet.
Explains how to verify the Lingo installation remotely via the dial-up telephone network or Ethernet connection.
Lists specific product codes, model numbers, and part numbers for ordering Lingo baseplates, assemblies, and accessories.
General| Brand | Novar |
|---|---|
| Model | lingo |
| Category | Controller |
| Language | English |
To Next Page
