DOC. #569062000 2/20/01 PRINTED IN U.S.A.
HPC/HPC Plus
Installation Instructions
A
B
C
D
E
F
5705390-B
RELAY OUTPUT STATUS
HEAT PUMP CONTROLLER
SERIAL NUMBER
MODEL
SOFTWARE
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE , AND 2) THIS
DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
MAX ALLOWABLE AMBIENT TEMP: 38 C (100 F) 70 C (158 F)
REFER TO INSTALLATION INSTRUCTIONS 5690620
TORQUE ALL TERMINALS TO 7 LB.-IN.
USE COPPER CONDUCTORS ONLY
LISTED ENERGY
MANAGEMENT
EQUIPMENT
SUBASSEMBLY
20M1
MADE IN USA
WARNING
THIS UNIT IS NOT INTENDED TO BE
USED AS A FINAL SAFETY DEVICE
OUTPUTS:
1A, 24VAC MAX PILOT DUTY, CLASS 2
POWER REQUIREMENTS:
24VAC, 8VA, CLASS 2
www.novar.com
To Next Page
Need help?
General
