The MCTRL660 PRO is a professional controller developed by NovaStar. A single MCTRL660 PRO has a loading capacity of up to 1920×1200@60Hz. It
supports custom resolutions with the width up to 3840 pixels and height up to 2560 pixels, which meets configuration requirement of ultra-large screens.
The MCTRL660 PRO is mainly used for the rental and fixed fields, such as concerts, live events, security monitoring centers, Olympic Games and various
sports centers.
•Input of ultra-high color depths: 10-bit/12-bit RGB 4:4:4/YCbCr 4:4:4, with
input resolutions up to 1920×1080@60Hz, increasing color expression
capabilities by 4096 times compared to 8-bit inputs, and presenting images
with rich and delicate colors, smoother transitions, as well as clearer details
•Supports individual Gamma adjustment for RGB when the color depth of
input source is 10-bit or 12-bit, which effectively controls image non-uniformity
under low grayscale and white balance offset to improve image quality.
•Low latency: Less than 1 ms (when the start position of image is 0.)
•Dual working modes: working as sending card and fiber converter
Independent Controller
MCTRL660 PRO
OLED Operation Screen
Operating Indicator
Ethernet port connection status
Ÿ Always on: The Ethernet port connection works
and the port serves as master.
Ÿ Off: The Ethernet port is not connected or the
connection does not work.
Ÿ A mark (not flashing) on top corner of icon: The
Ethernet port is in redundancy status, but the
redundancy has not taken effect.
Ÿ A mark (flashing) on top corner of icon: The
Ethernet port is in redundancy status and the
redundancy has taken effect.
Applications
Function knob
Ÿ Press the knob to enter a menu page or confirm
an operation.
Ÿ Rotate the knob to select a menu item or adjust
a menu parameter.
Ÿ Hold the knob and BACK button simultaneously
for 3 seconds to lock or unlock all the buttons.
Common Operations
Application of Sending Card Mode
Application of Fiber Converter Mode
Application of Dual-Output Working Mode
Quick Start Guide
Features
Standby Button
Function Knob
BACK Button
INPUT Button
USB Port
Control Connector Input Connector
Power Supply
Power SwitchGigabit Ethernet PortsOptical Ports
Input Source Monitoring Connector
Sending Card Mode
FiberConverterMode
The OPT1 port is the master input/output optical port, corresponding to the
6 Gigabit Ethernet ports. The OPT1 icon has different statuses:
•Always on: The OPT1 port connection works.
•Off: The OPT1 port is not connected or the connection does not work.
The OPT2 port works as the backup input/output port of OPT1.
•Always on: The OPT2 port connection works.
•Off: The OPT2 port is not connected or the connection does not work.
FiberConverterMode
•One-click backup and recovery, quickly recovering previous screen
configurations to deal with sudden on-site failure
•Image mirroring, allowing for more cool and dazzling stage effects
•Auto LED screen configuration
•Web control
•Pixel level brightness and chroma calibration
•Monitoring of inputs
•Multiple MCTRL660 PRO units can be cascaded.
Standby button
Ÿ Press the button to turn on the device.
Ÿ Hold down the button to turn off the
device.
USB port
Ÿ Used to update firmware
1–6: Indicate Ethernet ports 1–6.
• LINK: Ethernet port connection status
− Always on: The Ethernet port connection works.
− Off: The Ethernet port is not connected or the connection does not work.
•ACT: Signal transmission status of Ethernet port
− Fflashing: The Ethernet port is transmitting signals.
− Off: The Ethernet port is not transmitting signals.
1
2
SendingCard Mode
To Next Page
Need help?
General
