Need help?Do you have a question about the NovaStar MCTRL660 PRO and is the answer not in the manual?
General| Model | MCTRL660 PRO |
|---|---|
| Product Type | Controller |
| Weight | 3.5kg |
| Category | Controller |
| Input Interfaces | HDMI, DVI, SDI |
| Output Interfaces | Ethernet |
| Audio Input | 3.5mm audio jack |
| Control Ports | Ethernet |
| Control Protocol | Art-Net, sACN |
| Processor | ARM Cortex |
| Power Supply | 100-240V~ 50/60Hz |
| Operating Temperature | -20℃~60℃ |
| Operating Humidity | 10% to 90% |
| Certification | CE, RoHS, FCC |
Lists key features of the MCTRL660 PRO, including advanced technologies like ultra-high color depth and low latency.
Details supported video input connectors, sampling formats, and maximum input resolutions for various interfaces.
Illustrates the MCTRL660 PRO used as a sending card for outputting video signals via optical or Ethernet ports.
Shows the MCTRL660 PRO functioning as a fiber converter for optical and electric signal conversion.
Demonstrates the MCTRL660 PRO in a dual-output configuration for simultaneous video signal distribution.
Details the front and rear panel appearance and component layout of the MCTRL660 PRO.
Provides the physical dimensions and mounting specifications for the MCTRL660 PRO unit.
Explains the display elements and indicators on the MCTRL660 PRO home screen in sending card mode.
Details the home screen layout and status indicators when the MCTRL660 PRO is in fiber converter mode.
Guides users through a rapid sequence to configure the LED screen and display input sources.
Describes how to adjust the LED screen brightness for optimal viewing and longevity.
Covers various screen configuration methods including quick, advanced, and auto options.
Details how to set the input source, resolution, and color depth for video signals.
Explains options to control the LED screen's output status, such as normal, blackout, or freeze.
Details how to mirror images horizontally or vertically for specific display effects.
Outlines procedures for backing up and restoring controller configurations and settings.
Provides access to advanced features like mapping, redundancy, presets, and low latency.
Covers system configurations including factory reset, OLED brightness, and hardware version.
Explains how to set up communication modes (USB/LAN) and network parameters for PC connectivity.
Describes how to switch the controller's operational mode between sending card and fiber converter.
Allows users to change the language displayed on the MCTRL660 PRO's OLED menu screen.
Details performing per-channel gamma adjustments for enhanced image quality via software.
Explains how to configure the MCTRL660 PRO using its web-based interface.
Covers using NovaLCT and SmartLCT software for screen configuration and monitoring.
Guides users through the process of updating the controller's firmware using software.
Explains how to set a custom name for the sending card, displayed on the home screen.
To Next Page
