Need help?Do you have a question about the NovaStar MCTRL 4K and is the answer not in the manual?
General| Type | LED Display Controller |
|---|---|
| Max Frame Rate | 60Hz |
| Control Interface | USB, Ethernet |
| Brightness Adjustment | Yes |
| Color Adjustment | Yes |
| Power Supply | AC 100-240V, 50/60Hz |
| Color Depth | 10-bit |
| Input Interfaces | HDMI 2.0 × 1, DP 1.2 × 1 |
| Output Interfaces | 16x Neutrik Ethernet ports |
| Operating Temperature | -20°C to 60°C |
| Humidity | 10% to 90% RH |
| Dimensions | 482.6mm × 351mm × 94.1mm |
| Certification | CE, RoHS, FCC |
| Input Resolution | Up to 3840×2160@60Hz |
| Output Resolution | Up to 3840×2160@60Hz |
Use controller per regulations; ensure power outlet access; non-professionals should not disassemble.
High voltage, grounding, EMI, moisture, flammables, and foreign objects pose risks.
Device complies with Part 15 of FCC Rules; subject to two conditions regarding interference.
Equipment complies with FCC radiation exposure limits; maintain 20cm distance from body.
Identifies and describes components on the front panel, including buttons and screen.
Details the connectors and ports located on the rear of the device.
Lists supported input and output ports like DP, HDMI, DVI, RJ45, and OPT.
Details ETHERNET, USB control, and GenLock synchronous signal ports.
Guides on connecting signal sources like PCs and DVD players to the controller.
Illustrates how to connect multiple MCTRL4K units for expanded systems.
Explains navigation and selection using the knob and BACK button.
Describes the procedure to lock or unlock the device's operating controls.
Explains input status, source info, display config, status icons, and port connection indicators.
Covers mosaic and multi-card input modes and input source priority.
Explains setting input resolution using preset or custom methods.
Guides through loading cabinet files and configuring rows, columns, ports, and data flow.
Details how to adjust the LED display brightness via the menu.
Covers Advanced Config, Image Offset, and other screen adjustments.
Explains Normal, Freeze, Black Out, Test Pattern, and Image Settings for display output.
Enables display of cabinet port numbers and Ethernet port numbers for data flow tracking.
Describes saving and loading cabinet configuration files using NovaLCT-Mars.
Includes alarm thresholds, saving settings, redundancy, factory reset, and auto-return.
Chooses between USB preferred and LAN communication modes.
Configures IP address and subnet mask manually or automatically.
Details supported input ports like DP, HDMI, and DVI, including resolutions.
Covers Ethernet and optical fiber outputs, plus control interfaces.
Summarizes power consumption, operating temperature, dimensions, and weight.
Addresses common issues like no display, color cast, and resolution problems with solutions.
Advises on screen setup, multi-card mode, and warns against high-voltage component maintenance.
To Next Page
