NovaStar MCTRL660 PRO - Saving to RV Card; Redundancy; Presets; Inputs Backup

MCTRL660 PRO Independent Controller
User Manual
7 Menu Operations
www.novastar.tech
27
Table 7-2 Image parameters
Parameter
Description
Color temperature
Range: 4000 K–9500 K, Stepping: 100
Red/Green/Blue
Range: 0–255, Stepping: 1
Gamma
Range: 1.0–4.0, Stepping: 0.1
Contrast
Range: 0%–100%, Stepping: 1
Saturation
Range: 0%–100%, Stepping: 1
Hue
Range: -180–180, Stepping: 1
7.8.5 Saving to RV Card
By using this function, you can:

Send and save the configuration information to the receiving cards, including
brightness, color temperature, Gamma and display settings.

Overwrite the information saved to the receiving card earlier.

Ensure that the data saved in the receiving cards will not be lost in the event of
power failure of receiving cards.
7.8.6 Redundancy
Set the controller as the primary or backup device. When the controller works as a
backup device, set the data flow direction as opposite to that of the primary device.
If the controller is set as the backup device, when the primary device fails, the backup
device will immediately take over the work of the primary device, that is, the backup
takes effect. After the backup takes effect, the target Ethernet port icons on the home
screen will have marks on top flashing once every 1 second.
7.8.7 Presets
Choose Advanced Settings > Presettings to save current settings as a template.
Up to 10 presets can be saved.

Save: Save current parameters as a preset.

Load: Read back the parameters from the saved preset.

Delete: Delete the parameters saved in the preset.
7.8.8 Inputs Backup
Set a backup video source for each primary video source. Other input video sources
supported by the controller can be set as backup video sources.
After a backup video source takes effect, the video source selection is irreversible.
Table 7-3 Video source backup
No.
Primary Video Source
Backup Video Source
Backup 1
HDMI
NULL/DVI/SDI
XI'AN NOVASTAR TECH CO., LTD.