NovaStar VX4S User Manual

1
①: Power switch .
②: Operation screen
③: Knob . To press knob means Enter or OK, rotating knob represents selection
or adjustment.
④: ESC . Escape current operation or selection.
0. For Multi Nova VX4S cascaded application, most times customer want to
adjust the LED Screen brightness all together. While NovaStar provide
Multiple-screen Management function for you. Below diagram shows
how the hardware connected with each other physically. Then we run
NovaLCT-Mars for the Multiple-screen Management settings.

NovaStar VX4S Specifications

General

Loading Capacity	2.3 million pixels
Video Inputs	HDMI, DVI, VGA
Control Ports	USB
Certification	CE, RoHS, FCC
Processor	Unspecified
RAM	Unspecified
Storage	Unspecified
Graphics	Unspecified
Operating System	Unspecified
Ports	Ethernet, USB

Summary

NovaStar VX4S Hardware and Application Overview

Device Control Elements

Identifies power switch, operation screen, knob, and ESC button on the VX4S controller.

NovaLCT-Mars Software Setup and Access

Launching and Logging In

Steps to run NovaLCT-Mars and log in with administrator credentials.

Accessing Multiple-screen Management

Navigating to the Multiple-screen Management feature within the software.

Configuring Combined Screens

Setting Combined Screen Parameters

Configuring the number of combined screens and communication ports.

Finalizing Screen Configuration

Completing screen setup by clicking OK and preparing for brightness adjustment.

Adjusting and Saving Brightness Settings

Brightness Adjustment Interface

Using the software interface to adjust brightness for combined screens.

Saving Brightness to Hardware

Committing the adjusted brightness settings to the device hardware.