1. Turn FUEL TANK CAP VENT LEVER to ‘ON’ position. 4. Turn ENGINE SWITCH to ‘ON ’ position.
2. Turn ECO-THROTTLE SWITCH to ‘OFF’ position.
5. Ensure fuel selector switch is set to appropriate fuel.
3. Make sure CHOKE LEVER is in ‘open’ position to start.
6. Begin pulling the STARTER GRIP once the ‘READY’ indicator
(green) has lit up. Engine should start in 1-3 pulls. If engine does
not start, see troubleshooting guide. DO NOT PULL MORE THAN 25
TIMES.
STARTING ENGINE
To Next Page
Loading...