25
Advanced features
Effects - Delay
To access the Effects processor and other menus, the FUNC-
TION switch in the master control area must be set to SHIFT
(right hand position).
Instead of numerically selecting programs, the keypad access-
es Menus as described by the legends below each key. For
example KEY 1 accesses the DELAY effects Menu, KEY 5
accesses the VOCODER effects Menu etc.
Operation of Menus
In SHIFT mode, each key therefore has a menu associated
with it and for ease, the contents of the menus are presented
in this manual in the form of a table. The first press of the
specific button enters the first level of the menu. Subsequent
key presses select a new item in the menu until the final one
is reached. A further press loops back to the first item (See
the Delay table menu opposite as an example).
A previous item in the Menu may be selected by pressing the
AUDITION button. This allows for easy navigation, both back-
wards and forwards in the menus. NOTE: The Audition button
only behaves like this when the FUNCTION button is in the
SHIFT mode.
Adding a Delay effect to a sound
Ensure the function switch is set to SHIFT. Press KEY 1 and
the display shows d L with an alternating value. Turn the
PORTA/DATA knob clockwise.
Depending on the settings of the other parameters in the
delay menu, a delay effect will be heard.
Note: As long as the function switch is set to shift, the display
will alternate as in the menu table. To return to displaying and
selecting a program, set the switch back to normal mode.
Key 1 Function Alternating LED Display
1st Press Delay Level d L 0 - 27.
2nd Delay Time d t 0 - 27.
3rd Delay Feedback d F 64. - 63
4th Delay Sync d y oF - 2b
5th Delay Stereo Width d S 0 - 27.
6th Delay Ratio d r 11 - 14
7th Delay Wheel Level d u 0 - 27.
8th
To Next Page
Loading...
