57
Utility Mode - Receiving sounds from an external device
Advanced features
sound in bank2) Go to UTILITY mode. Press Key 9 twice, the
display will indicate B 1 (restore bank 1) Each subsequent
press will move to the next bank, bank 2. Press the + KEY
once, the display will start flashing the selected destination
bank number as a prompt.
A second press of the + KEY and the two dots in the display
will also flash. The third press actually initiates the restore
process. Finally the two dots only will flash and the MODE will
change back to PROGRAM mode.
NOTE: If at any time it is necessary to abandon the restore
process, then press the MODE select button.
Receiving a single sound from an external device (or other
A-Station)
Sounds (using MIDI SYSEX transfers) may be sent to the unit
at any time from a sequencer/computer or other A-Station.
When a sound is received the display will alternate with - - and
the current program number. The received sound will be heard
when a note is played. If the sound is to be kept it must be
saved in the normal way.
Receiving a bank of sounds from an external device (or
other A-Station)
As long as the Memory protect is switch off (see page 6) banks
of sounds (using MIDI SYSEX transfers) may be sent to the unit
at any time from a sequencer/computer or other A-Station. The
bank of sounds will be written into the bank of the currently
selected program. For example, if sound 321 is selected, the
incoming bank will be placed in bank 3. To acknowledge recep-
tion of incoming data, the display will show the incoming pro-
gram numbers while data is being received.
To Next Page
Loading...
