Novation A-Station - Notes

59
Notes
Advanced features
Volume Control
The Volume may be overridden by MIDI Volume data. If MIDI
Volume of 0 has been received by the A-Station, no output will
be heard regardless of the position of the volume knob. To
reset the volume, either transmit the relevant MIDI Volume level
or move the Volume knob - this automatically overrides the
MIDI setting.
Responding to MIDI Sustain Pedal On / Off
The A-Station will respond the normal MIDI controller message
for Sustain Pedal On / Off. Connect a sustain pedal to the MIDI
controller keyboard or workstation that is to be used in the sys-
tem. It is often necessary to check that the polarity of the pedal
is correct for the controller keyboard or workstation that it is to
be used with.