Novation A-Station - Distortion and Panning

The Distortion and Panning menu table opposite lists the
parameters that may be edited in for the Distortion and Panning
processor.
Distortion Compensation
If distortion is added to a sound it will tend to get louder. In
order to contain or compress the sound back to a level which is
consistent with other programs, use the compensation control.
Distortion Wheel Amount
Determines how much movement of the Modulation wheel on a
MIDI controller keyboard will introduce the Distortion effect.
Panning
The Panning control in the A-Station performs the same func-
tion as the Panning knob on a mixing console. It can be used to
position a sound anywhere from left to right in the stereo field.
Changing the Pan Position of a sound
Ensure the function switch is set to SHIFT. Repeatedly press
KEY 4 until the display shows P P and an alternating value.
Turn the PORTA/DATA knob clockwise or anticlockwise to move
the sound across the Stereo field.
Pan Depth
A subsequent press of Key 4 will select Pan Depth. This
parameter determines how much of the Panning effect can be
heard.
Pan Rate
If the Pan Depth is set to a non zero value, the sound will move
from the Left to the Right at at speed determined by the Pan
Rate.
31 Advanced features
Effects - Distortion - Panning
Key 4 Function Alternating LED Display
1st Press Distortion Drive d d 0 - 27.
2nd Distortion Compensation d c 0 - 27.
3rd Distortion Wheel Amt d u 0 - 27.
4th Pan Position P P 64. - 63
5th Pan Depth P d 0 - 27.
6th Pan Rate P r 0 - 27.
7th Pan Sync P Y oF - 12
8th Panning's LFO Initial Position P I oF - R t
9th EQ Amount E A 64. - 63
10th EQ Frequency E F 0 - 27.
13th EQ Depth E d 0 - 27.
11th EQ Rate E r 0 - 27.
12th EQ Sync E y oF - 12
14th EQ LFO Initial Position E k oF - R t
15th
Distortion.. Panning.. Menu