Advanced features
Changing the Voice Mode
Repeatedly press KEY 0 (ensure the function switch is in
SHIFT mode) until the display shows n n and an alternating
value. The table above illustrates the modes according to the
letters displayed. Use the PORTA/DATA knob to change the
mode.
Portamento Type
When PORTAMENTO is applied to a sound, the slow change in
pitch from one note to the next may be at a linear or exponen-
tial rate. Experimentation with this parameter is recommend for
different playing styles. To change the type, repeatedly press
KEY 0 (ensure function switch is in shift mode) until the display
shows P t alternating with either E or L. Use the PORTA/DATA
knob to change the mode.
Envelope Triggering Types (Mono mode only)
When the Voice mode is set to any of the Mono options, differ-
ent envelope triggering options are available for legato playing
styles (notes overlapping). When the first note of a musical
phrase is played, it might be desirable to have both the
Amplifier and Filter envelopes trigger. For the remaining legato
notes,just the filter envelope re-triggering would create the
effect of the phrase becoming quieter and quieter.
Changing the Envelope Triggering Type (Mono mode only)
Repeatedly press KEY 0 (ensure function switch is in shift
mode) until the display shows E t and an alternating value. The
table below illustrates the modes according to the letters dis-
played. Use the PORTA/DATA knob to change the mode.
Envelope Auto Triggering from External Audio Input
The external audio triggering menu option determines how the
external audio signal is processed. To change the settings,
repeatedly press KEY 0 (ensure function switch is in shift
mode) until the display shows E E and an alternating value.
Rotate the PORTA/DATA knob until the value changes to the
required selection as shown in the table on the following page.
The option E d will send the signal direct to the effects proces-
sor.
49
Velocity - Triggering - Synchronisation
To Next Page
Loading...
