Novation FLKEY 37 - Pot Modes; Plugin Control; Mixer and Channel Controls; Custom Mode

14
Pot Modes
The FLkey has eight pots to control various parameters inside FL Studio depending on the pot mode.
To access pot modes:
1. Hold or double press Shift to enter shift mode. The pads light up. The top row of pads
represents the pot modes. The text above each pad shows you the pad’s pot mode.
2. Press a pad to select the pot mode you want to use. The table below lists FLkey’s pot modes.
When you enable ‘Pickup (takeover mode)’ inside FL Studio’s MIDI settings, the pot needs to reach
the original value before the changes apply to the parameter connected to the current pot.
Pot Mode Use
Plugin Plugin mode controls eight parameters, dependent on the plugin in focus.
The screen shows the parameter name together with the new value temporarily.
Mixer Volume Mixer Volume mode maps the mixer faders in banks of eight to the pots.
Mixer Pan Mixer Pan mode maps the Mixer Pan pots in banks of eight to the pots.
Channel
Volume
Channel Volume mode maps the Channel Volume pots in banks of eight to the
pots.
Channel Pan Channel Pan mode maps the Channel Panning pots in banks of eight to the
pots.
Custom You can assign the eight pots to custom parameters.