39
Settings
Pressing the Settings button shows the settings menu on the screen. You can scroll through the Settings
list using the Preset ▲▼ buttons. To adjust the settings’ value, use the pads or the Page ◄ ► buttons. The
available settings are shown below.
Settings Description Value Range Default
Keys MIDI Channel Sets the MIDI channel for the keys 1-16 1
Chords MIDI Channel Sets the MIDI Channel for the Scale
Chord and User Chord
1-16 2
Drums MIDI Channel Sets the MIDI Channel for the Drum
Mode
1-16 10
Velocity Curve (Keys) Select a velocity curve for the pads Soft/Normal/Hard/Off Normal
Velocity Curve (Pads) Select a velocity curve for the pads Soft/Normal/Hard/Off Normal
Pad Aftertouch Set the Aftertouch type Off/Channel/Poly Poly
Pad AT Threshold Set the threshold in which the
aftertouch kicks in
Low/Normal/High Normal
Pot Pick-Up Turn pot pick-up on/off for
standalone mode. This does not
affect FL Studio.
Off/On Off
MIDI Clock Out Turn MIDI Clock out on/off Off/On On
Brightness Adjust the pad and screen
brightness.
1-16 9
Vegas Mode Turn off/on Vegas Mode Off/On Off
LED Brightness
You can adjust all the FLkey’s LEDs to suit your environment, for example, you may want the LEDs
brighter in a light environment. To change the LED brightness:
1. Go to the Settings Page.
2. Use the Preset ▲▼ to go to Brightness.
3. Press the Page ◄ ► buttons or the Pads to change the brightness to a value from 1 to 16.
Vegas Mode
If the FLkey is idle for five minutes, it enters Vegas mode. In this mode, colours scroll across the pads
indefinitely until you press a pad, button, or key. To turn Vegas mode on and off:
1. Go to the Settings Page.
2. Use the Preset ▲▼ to go to Vegas Mode.
3. Press the Page ◄ ► buttons or the first two Pads, the screen displays Vegas Mode: On/Off.
To Next Page
Loading...
