Novation FLKEY 37 - Scale Set Selection; Octave Transposition

34
The bottom row of pads light so you can select a scale, the screen shows the selected scale. From left
to right the pads select the following scales:
1. Minor
2. Major
3. Dorian
4. Mixolydian
5. Phrygian
6. Harmonic Minor
7. Minor Pentatonic
8. Major Pentatonic.
To exit scales setting mode press the Scale button or any function button. The settings mode also
times out after ten seconds of inactivity, with the keyboard returning to its previous state.
Octave Buttons
Pressing the Octave buttons increments and decrements the keyboard octave by ±1. The available
octaves range from C0 to G10 in FL Studio (C-2 – G8 with other software). Shift pressing the Octave
buttons transposes the keyboard up or down by one semitone.
After you change the octave, the screen displays the current Octave range for five seconds. You can
tell if your keyboard is in a different Octave as either the Octave +/- button lights. The brighter the
button, the more octaves you have moved.
To reset the keyboard octave to 0, press the Octave +/- buttons at the same time. To reset the
keyboard transposition to 0, hold shift and press the Octave +/- buttons at the same time.
Hold Shift and press Octave +/- to transpose the keyboard up or down in semitones. The screen
shows the transposition amount.