9
15
Octave - + Buttons - Transposes the keyboard across ten octaves (C-2 to C6). Pressing both
buttons sets the transposition amount back to 0. “Octave Buttons” on page 34
16
Fixed Chord Button – Stores a chord for you to play anywhere on the keyboard. While holding
the button, press and release the keys you wish to be part of the ‘fixed’ chord. “Fixed Chord” on
page 35
17
Page ◄ ► Buttons – These navigate left and right in the Channel Rack to extend patterns when
sequencing, page between banks in FPC and bank between pages of Slicex/Fruity Slicer. You can
also change the voicing page in Scale Chord mode, Transpose in User Chord or Custom mode
and, adjust the pad octave in Instrument mode..
18
Note Repeat Button - Enables the pads to send continuous notes at various rates specified using
the Shift function on the keyboard. “Note Repeat” on page 36
19
Pads – Audition and select channels in Channel Rack mode. Use integrations with FPC, Slicex, and
Fruity Slicer in instrument mode. Sequence beats using Sequencer mode. Trigger chords using the
Scale and User Chord modes and Custom Modes.
20
Channel Rack ▲▼ Buttons - Move up and down FL Studio’s Channel Rack in all modes to change
the selected instrument (and the instrument played by FLkey).
21
Play, Stop, Record - Controls the playback in FL Studio.
22
Score Log - Capture the last five minutes of played MIDI notes in FL Studio
22
17
1918 2015 21
16
To Next Page
Loading...
