24
Working with Cubase
Setup
Cubase 12+ comes with the Launchkey [MK3] script preinstalled. You need Cubase 12+ for the
Launchkey to work. Cubase automatically detects your Launchkey [MK3]. The Launchkey defaults to
the following modes:
• Pad Mode – Session Mode.
• Pots – Volume (Launchkey 25/37) or Pan (Launchkey 49/61/88).
• Faders (Launchkey 49/61/88) – Volume
For quick access to the modes and information for the Launchkey you have connected click on:
Studio > Studio Setup... > MIDI Remote > Open MIDI Remote in Lower Zone.
You will see the following, where you can see what each control on the Launchkey is mapped to.
To Next Page
Loading...
