13
PoRtS
What is a Port and how does it work?
The SL MkII connects to the computer via a single USB cable, however this USB connection actually consists of 3
sub-connections called ‘ports’.
Port 1
This port will be used a lot as it sends messages from the SL MkII Keyboard, Pitch / Modulation Stick and Sustain
and Expression Pedals.
Port 2
Is generally reserved for special templates in advanced mode, but can be also used in more complex Advanced
mode set-ups.
Automap Port (Hidden)
This is a hidden port (i.e. your computer does not display this port anywhere) and is used for all Automap Server
messages. The Automap Server application then acts as a bridge between the SL MkII Hardware and your DAW
software and plug-ins.
Control information
U1 (Port 1)
U2 (Port 2)
Automap Port (Hidden)
SL MkII (Port 1)
SL MkII (Port 2)
Automap Port (Hidden)
Power
Feedback - LCD Screen/LED Rings
USB
To Next Page
Loading...
