Novation SL MkII - Hardware Control in Advanced Mode; Software and Hardware Control

18
HARDWARE ContRoL
In Advanced mode, MIDI data can be sent to either one of the 2 MIDI output ports
You can set up the templates so that all controls in the template are sent to only one or both of the MIDI output ports.
SoftWARE AnD HARDWARE ContRoL
Advanced mode templates can be used in complex systems so that controls are sent to hardware via the MIDI ports
and to software via the USB ports 1 + 2. You can even set different controls from within the same template to be sent
to different output ports.
M1
M2
Port 1 DAW/Sequencer
Any software that
response to MIDI
Port 2
M1
M2