EasyManua.ls Logo

Novy Panorama Pro 1821 - Messages at the Extraction; Miscellaneous

Novy Panorama Pro 1821
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
– 77 –
The automatic cooking controller does not seem to be
working:
the cooking zone is still warm [
H
]
the maximum cooking level has been selected [
9
]
the cooking level was selected using the control key [
].
10.2 Messages at the extraction
Code
1st LED
flashes
Run-out function activated
2 LEDs
flash
The tower was not detected at the requested
position.
Check nothing can prevent the movement of
the extraction tower
Press
Contact Novy
3 LEDs
flash
Safety switch in extraction tower constantly
activated
Press
Contact Novy
Turn on spindle axe with a screwdriver.
4 LEDs
flash
Front extraction tower glass is missing
Front extraction tower glass has not been put
in place correctly
Press
Extraction tower detection switch faulty
The cooker hood does not extract well. What can be the
cause of this problem?
Check that the top glass of the extraction tower is correctly
positioned. The suction opening must be clear.
Check the grease filter. Follow the cleaning indication. On
average, the filter must be cleaned every two weeks to
ensure the extraction works correctly.
Check the air supply in the house. As soon as the cooker
hood is switched on, make sure that air is supplied by
opening the grates in the windows or by opening a window.
Check the duct for blockages or constrictions which prevent
proper extraction of the air.
10.3 Miscellaneous
Fault: In the event of a fault, please do not hesitate to contact
our Repair Service:
Belgium: Tel.: +32 (0)56 36 51 02
France: Tel.: +33 (0)3 20 94 06 62
Germany: Tel.: +49 (0)511.54.20.771
The Netherlands: Tel.: +31088-0119110
Spain: Tel.: +34 938 700 895
Italy: Tel.: +39 039.20.57.501
For all other countries, contact your local Novy installation
engineer in Belgium: Tel.: +32 (0)56/36.51.02
For a proper and prompt handling the Repair Service needs to
know the type of your device. This information can be found on
the type plate on the inner frame of the extraction unit.
Stick the provided sticker with the type plate and serial number
here.

Table of Contents

Other manuals for Novy Panorama Pro 1821

Related product manuals