Noxon Mod Slider - Stop Motion Mode

Pág. 17
English
Stop motion mode: Allows to play back a previously recorded movement step by step.
NOTE: The stop motion movement recording is shared with the time lapse mode, but not with the
automatic mode, and when recording a movement for the time lapse or stop motion mode we lose the
motion recorded for the automatic mode.
The parameters that we can congure to dene the execution of the time lapse are the following:
• CLIP T: It is the time desired for the resulting clip from the stop motion to last.
• CLIP FPS: The rate, in frames per second, at which the video clip will compile. It is used to calculate
the number of shots to take.
• RAMP: It allows dening a spatial ramp, making the displacement between the initial and nal photos
shorter than the displacement between the photos in the central section.
• PREVIEW / GO: Appear once a movement has been recorded. It allows to make a preview (PRE-
VIEW) where the movement is executed continuously, or to start the stop motion execution (GO).
• GO-TO-0 / RESUME: Is shown once the stop motion has been launched and return to the stop-mo-
tion menu having left the slider in a di󰀨erent frame than the initial one. Allows to end the stop motion
execution and return to the initial position (GO-TO-0) or return to the stop motion execution screen, to
continue with the process (RESUME). When these options are visible, it is not possible to change the
parameters (CLIP T, CLIP FPS, RAMP) of the stop motion without having nished its execution.
On the stop motion process screen, it is possible to go frame by frame, both forward and backward, by
pressing the control knob. By turning the knob you can select this direction.
To jump to any frame, select the current frame numeric indicator, click on it, and modify it. The unit will
make a continuous movement until the indicated frame.
If the control knob is kept pressed, you will return to the previous stop motion conguration screen,
leaving the device in that frame, and maintaining control over the position, being able to return through
the RESUME option.
WARNING: If you access an operating mode other than STOP MOTION, start the recording sequence
of a new movement, or turn o󰀨 the slider, you will lose track of the position and have to start a new
STOP MOTION. Switching o󰀨 or disconnecting the controller, however, will not have these consequen-
ces.