NPK PH1 - Carrier Machine Compatibility

- 6 -
CARRIER MACHINE COMPATIBILITY
These carrier weight ranges are intended as a guideline only. Other factors, such as
stick length, counterweights, undercarriage, etc., must be taken into consideration.
Mounting a HAMMER that is too heavy for the carrier machine
can be dangerous and damage the machine. Verify carrier
stability with hammer before transport or operation.
Mounting a HAMMER that is too small for the carrier machine can damage the
HAMMER, cause tool breakage and void Warranties. Please consult NPK Engineering
for specific detailed information.
CARRIER WEIGHT lbs. (kg)
HAMMER MOUNTING RECOMMENDED RANGE
MODEL STYLE lb (kg)
PH1
Excavator 4,850 - 5,955 (2,200 - 2,700)
Skid Steer 4,850 - 5,955 (2,200 - 2,700)
PH2
Excavator 5,955 - 8,820 (2,700 - 4,000)
Skid Steer 5,955 - 8,820 (2,700 - 4,000)
PH3
Excavator 8,820 - 13,228 (4,000 - 6,000)
Skid Steer 8,820 - 13,228 (4,000 - 6,000)
PH4
Excavator 13,228 - 19,842 (6,000 - 9,000)
Skid Steer 13,228 - 19,842 (6,000 - 9,000)
*Specifications are subject to change without notice.