2.8.8 Exit the Menu
In the main menu interface, select the Eighth icon, and press Menu/Set Button
to enter preview mode and hide the main menu.
2.9 View files
You can view the files from your computer system. Switch off the device,
open the battery cover by following the direction indication on it, remove the
battery, and take out the Micro SD Card from the card slot. Connect the SD
card to the card reader and insert it to the USB interface on your computer,
the files in the Micro SD card can then be viewed or removed in your
computer.
2.10 Battery Charging
The device can be continuously worked for 3hs when being fully charged.
When the battery is insufficient, it should be recharged in time accordingly.
There are the following 2 different ways of battery charging:
1) Connect the power interface with the standardly configured power adapter
cable that is special for Micro Endoscopic Video System, then connect the
adapter to AC 220V power. When the indicator light located on the handheld
main unit is on, means that the system is being recharging.
2) Shut down the Micro Endoscopic Video System, open the battery cover by
following the direction indication on it, take out the battery and install it into
the standardly configured charging base, connect it to the power supply for
independent battery recharging.
Caution: When the power adapter is connected, the Micro Endoscopic
Video System can be normally used while being recharging.
Caution: The device must be switched off before loading and unloading
the battery.
Caution: Please use the original battery and charging base provided by
our company.
24
To Next Page