8
For information on how to use the coupling wrench, see
“4–2 How to use a PTL Coupling Wrench (Option)”.
KCL-LED
1 Hold the coupling and the rear of the handpiece firmly
and pull them straight out (Fig. 11).
Fig. 11
2 Secure the coupling with the supplied coupling wrench,
loosen the hose nut, and pull it straight out (Fig. 12).
Fig. 12
CAUTION
• Do not operate the retention lock ring while
pressurized. This may cause the handpiece to shoot
off of the coupling unexpectedly.
To Next Page
Loading...