NSK PTL-CL-LED - Using the PTL Coupling Wrench; Connecting with PTL Coupling Wrench; PTL Wrench as Slip Stopper

9
EN FR
4–2 How to use a PTL Coupling
Wrench (Option)
4–2–1 Connecting
PTL-CL-LED, PTL-CL-LED III, FM-CL-M4,
FM-CL-M4-T
To connect, align and insert the pin of the coupling wrench
carefully and firmly into the pin holes of the coupling, and
turn the wrench until you hear the noise “Click”
(Fig. 13, Fig. 14).
Fig. 13 Fig. 14
4–2–2 Approach in the use of coupling
wrench
Use it as a slip stopper of the coupling side when loosening
or tightening the hose nut to connect/disconnect the
coupling to/from the hose (Fig. 15).
Tighten
Loosen
Fig. 15