NSK PTL-CL-LED - Water Supply Control; Water Supply Control for PTL-CL-LED III; Water Supply Control for KCL-LED

10
KCL-LED
Water Adjustment Ring can rotate back side to decrease the
water supply (Fig. 17).
Fig. 17
4–3 Controlling Water Supply
(PTL-CL-LED III, KCL-LED)
Water supply is controlled by turning the Water Adjustment
Ring.
PTL-CL-LED III
Water Adjustment Ring can rotate to both sides. Water flow
level decreases as the mark on the Water Adjustment ring
gets farther from the mark on the coupling.
When the Water Adjustment Ring is turned 180 degree,
water supply stop (Fig. 16).
Fig. 16