English
3
2. Component Names
No. Parts Name Quantity
1
Varios2 Handpiece
(
Non-Optic
)
Varios2 LUX Handpiece
(
Optic
)
1
2
Handpiece Cord (Unshielded 2M)
(
Optic or Non-Optic
)
1
3
Sterilization Case
1
4
Tip Wrench
3
5
Tip G4
1
6
Tip G6
1
7
Tip G8
1
8
O-Ring
2
9
Tip Cover S (Option)
1
Varios 170
(
Non-Optic
)
Varios 170 LUX
(
Optic
)
G4
G6
G8
5
6
7
4
3
9
8
* Operation Principle
A sinusoidal electrical signal, at ultrasonic frequency ( f > 20kHz ), is delivered by the generator. This signal is applied to the
‘piezoelectric ceramic’ located inside the transducer. Piezoelectric ceramic converts this signal into mechanical vibrations.
These vibrations are at the same ultrasonic frequency as the electrical signal. The mechanical vibrations are propagated
towards the distal end of the transducer. The “TIP” insert, which is attached at the distal end of the transducer, vibrates at
ultrasonic frequencies and makes it possible to achieve the aimed purpose.
1
1
2
2
1. Specification
Input Voltage AC 24 V ± 10%
Power Supply Frequency 50 / 60 Hz
Vibration Frequency 28 - 32 kHz
Maximum Output 11 W
Lighting
Varios2 : No
Varios2 LUX : Yes
Use Environment
Temperature : + 10 - 40 °C
Humidity : 30 - 75 %
Atmospheric pressure : 700 - 1060 hPa
Store Environment
Temperature : - 10 - 60 °C
Humidity
: 10 - 85 %
Atmospheric pressure : 500 - 1060 hPa
OPTION
Varios 170
To Next Page
Loading...
Need help?
General
