What to do if no purified water comes from Nu Skin Ecosphere faucet?
If no purified water is coming from the NU Skin Water Filtration Systems faucet, ensure the power cord is properly plugged into an electrical outlet and check the abnormal state LED indicator. Also, verify that the 3in1 cartridge is correctly installed, the main water supply is open, and that you are using the appropriate 3in1 cartridge.
How to improve purified water flow in Nu Skin Ecosphere?
If you experience poor purified water flow from your NU Skin Water Filtration Systems, check if the 3in1 cartridge is blocked or nearing its life cycle. Ensure the tap water pressure isn't too low and the water temperature is appropriate (not exceeding 38°C). Clean the faucet adapter to remove any deposits or impurities.
Why does NU Skin Water Filtration Systems switch to tap water mode?
If the NU Skin Water Filtration Systems switches from purified water mode to tap water mode, ensure the purified water temperature does not exceed 38°C. If the water purifier overheats due to excessive use, allow it to cool down. Also, verify that the 3in1 cartridge is correctly installed.
What does flashing orange LED mean on Nu Skin Ecosphere Water Filtration Systems?
If the NU Skin Water Filtration Systems displays a flashing orange LED, it could mean the 3in1 cartridge is nearing the end of its life cycle. Purchase a new 3in1 cartridge soon.
General| Brand | Nu Skin |
|---|---|
| Model | Ecosphere |
| Category | Water Filtration Systems |
| Language | English |
Instructions on removing the faucet aerator to prepare for adapter installation.
Guide to selecting and securely attaching the correct faucet adapter for the water purifier.
Steps for inserting and preparing the 3-in-1 cartridge for use in the water purifier.
Steps to prime the water purifier and ensure readiness for use.
How to select and dispense purified water, including operational precautions.
Guidance on cleaning the faucet adapter to remove impurities and prevent blockages.
To Next Page
