module is designed for use with the StimRehab or ComboRehab only.
EMG200
The EMG200 is designed for use with the StimRehab and the ComboRehab. With EMG
electrodes the EMG200 generates the sEMG (Surface Electromyography) , ETS (Surface
Electromyography with Triggered Stimulation) through which the EMG electrodes are
attached to the patient.
BTM200
The BTM200 Battery Module is designed for use with the Rehab-Series systems to create a
battery powered Therapy System. No additional Software is required for the Module as the
System automatically recognizes its presence and activates all necessary software inherent
in the System.
CT2200
(two channels electrotherapy,
ultrasound and combo)
CT2201
（two channels electrotherapy,
ultrasound and combo+vacuum
module）
CT2202
（two channels electrotherapy,
ultrasound and combo+EMG
module）
Mainframe
CT2200
Mainframe
CT2200
Mainframe
CT2200
Mainframe
CT2200
CT2203
（two channels electrotherapy,
ultrasound and combo+battery
module）
ComboRehab²
ComboRehab² Vac
ComboRehab² Bio
ComboRehab² Plus
Name
Model Mainframe
Vacuum module
（VAM200）
EMG module
（EMG200）
Battery module
(BTM200)
5
Rehab-Series
To Next Page
Loading...
