Do you have a question about the NuAire CYFAN-C and is the answer not in the manual?
Explains unit operation modes including 230V to 24V conversion and continuous/intermittent use.
Details surface, semi-recessed, and window mounting methods for the CYFAN-C range.
Lists optional kits like wall mounting, window mounting, and subsidiary spigot kits.
Lists the components included in the fan unit box, including fan body and fixing kits.
Provides detailed dimensions of the fan unit from front, top, back, and side views.
Shows the dimensions for the optional window mounting kit.
Instructions for replacing the 125mm spigot with a 100mm spigot.
Step-by-step guide for fitting back draught shutters to the fan spigots.
Steps for converting the fan unit from 230V mains to 24V SELV operation.
Guidance on mounting the transformer enclosure, including splash zone considerations.
Detailed procedure for installing the transformer and PCB section 1 into the enclosure.
Notes on appropriate wiring sizes for the transformer to fan connection.
Illustrates various wiring options for 24V SELV and 230V operation, including remote and pull-cord.
Step-by-step guide for installing the fan unit using the surface mounting method.
Lists the necessary tools for performing the surface mounting installation.
Detailed steps for mounting the fan, securing wiring, and fitting components.
Instructions for installing the fan unit using the semi-recessed mounting kit.
Lists the necessary tools for performing the semi-recessed mounting installation.
Detailed steps for fitting the fan and semi-recessed mounting kit.
Instructions for installing the fan unit using the optional window mounting kit.
Lists the necessary tools for performing the window mounting installation.
Steps for fitting the fan into the window kit, including securing and wiring.
Detailed steps for preparing and fitting the fan unit into the window mounting assembly.
Instructions for assembling and fitting the window kit components.
Instructions for installing the fan unit with a side spigot using the optional kit.
Lists the necessary tools for performing the side-spigot mounting installation.
Detailed steps for fitting the fan with a side spigot, including filter and PCB reassembly.
Guidance on setting the boost speed control for specific airflow rates with the side spigot.
Describes the factory default settings for intermittent/continuous operation and humidity sensing.
Specifies minimum flow rates for different rooms as per Part F 2010 regulations.
Explains how to configure the fan for continuous or intermittent operation and airflow adjustment.
Details the humidity sensing feature and its effect on fan operation.
Information on adjusting the run-on timer for delayed fan shutdown.
Guidance on checking and adjusting airflow rates, especially with different spigots or duct runs.
Details the 5-year warranty coverage, including labour and replacement parts.
Provides contact details for technical assistance, spare parts, and after-sales support.