NUCLEONIX SYSTEMS GA720 - Page 22

19
QC REPORT FOR GAMMA AREA MONITOR
TYPE: GA720
Sl.No :
Date:
1. MECHANICAL INSPECTION (HARDWARE FIXTURES):
No
Description
Observation
Hardware fixtures
Check the dimensions of the unit
OK/NOT OK
Front panel control
Check the keypad, displays & lamp stickers properly
or not
OK/NOT OK
Side panel control
Check socket of main card 3 pin,5 pin I/O connecter
OK/NOT OK
Inside of the unit
Check proper mounting of PCB Transformer, relay
etc
OK/NOT OK
Labels of main unit
Check for labels of front & side panel of each
connector
OK/NOT OK
Label of GM probe
Check for the labels of probe (direction & axis of
detector)
OK/NOT OK
2. PAINTING / PLATING / ANODIC PRINTING:
No
Description
Observation
Box painting
Check the color of unit (Dark gray (s))
OK/NOT OK
Anodic printing
Check whether the unit is according to NSPL
standard or not.
OK/NOT OK
Inside chassis irradiating
Check whether the unit is according to NSPL
standard or not.
OK/NOT OK
Front panel
Check the printing of letters are polycarbonate
stickers pasted properly or not
OK/NOT OK
Heat shrink
Check whether the cable is having proper heat
shrink with sleeve or not
OK/NOT OK
Jumpers
Check whether all appropriate jumpers are placed
or not.
OK/NOT OK