NuForce P-8S User Manual

Manual
1
____________________________________________________________________________________________________
356 South Abbott Avenue, Milpitas, CA 95035, USA • PHONE: +1-408-890-6840 • FAX: +1-408-262-6877
nuforce.com • EMAIL: salesteam@nuforce.com
, support@nuforce.com • Skype: nuforce-sales
FCC Notice “Declaration of Conformity Information”
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna. Locate the antenna more than 30 feet away from the
equipment and connect it to the receiver using a shield cable.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: Only peripherals complying with the FCC class B limits may be attached to this equipment.
Changes or modifications made to this equipment, not expressly approved by us or parties authorized by us
could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
SAFETY INSTRUCTIONS
There are two categories of Safety Instructions included in this manual:
• Product Warnings, (i.e., what must never be done to assure avoiding those hazards that could
cause bodily injury or property damage); and
• User Directions (i.e., what must always be done to assure the safe use of your device).
The Safety Instructions contained in this manual have been categorized in accordance with the seriousness
of the potential hazards through the use of Signal Words. Those Signal Words, and their intended
meanings, are as follows:
DANGER: Indicates that a failure to observe the Safety Instructions could result in death or catastrophic
bodily injury.
WARNING: Indicates that a failure to observe the Safety Instructions could result in serious bodily injury.
CAUTION: Indicates that a failure to observe the Safety Instructions could result in minor bodily injury or
property damage.
NOTE: Designates important information that relates to activities and/or conditions that might result in
loss of data and/or damage to your device.
Safe Use and Operation of Your Device
This equipment emits stray RF energy and will interfere with the reception of signals by airborne electronic
navigational devices or medical devices. Do not operate this equipment near any sensitive medical devices.
WARNING: Use only grounded AC power cords.

NuForce P-8S Specifications

General

Brand	NuForce
Model	P-8S
Category	Amplifier
Language	English

Summary

FCC Regulatory Compliance Information

Interference and Mitigation Measures

Describes potential radio interference and user actions to correct it.

FCC Compliance Rules and Modifications

Details compliance with FCC rules and warns against unauthorized modifications.

Safety Instructions and Hazard Identification

Categories of Safety Instructions

Explains product warnings and user directions categories.

Signal Words for Hazard Indication

Defines signal words like DANGER, WARNING, CAUTION, and NOTE.

General Safety Precautions

Covers precautions for RF energy, medical devices, and power cords.

Operational Safety Guidelines

Critical Safety Warnings

Highlights dangers of misuse, disassembly, child interaction, and environmental hazards.

Environmental and Usage Guidelines

Provides guidance on water exposure, ventilation, heat sources, and power connections.

Device Usage Conditions and Service Indicators

Conditions Requiring Cessation of Use

Lists signs and events (damage, exposure) that mandate immediate stop of device use.

NuForce Preamplifier Overview

P-8S Key Features

Lists the main technical features of the NuForce P-8S preamplifier.

Preamplifier Technology Philosophy

Explains NuForce's approach to preamplifier design and sound reproduction.

Product Specifications

Audio and Connectivity Specifications

Details audio inputs, outputs, trigger out, and remote control features.

Performance and Physical Characteristics

Lists performance metrics like dynamic range, THD+N, impedance, and physical dimensions.

Power Requirements and Warranty Period

Specifies power requirements and the limited warranty period.

Initial Setup and Operation

Important First Steps

Covers break-in period, cable connection warnings, and AC input voltage.

Quick Setup Guide

Provides step-by-step instructions for connecting, powering on, and initial adjustments.

Front Panel Controls Explained

Explains the function of the input selection and volume knobs on the front panel.

Controls and Connectivity Details

Front Panel Operations

Details volume control, mute function, and memory retention features.

Rear Panel Connections

Describes various rear panel inputs, outputs, and trigger connections.

Remote Control Battery Installation

Guides on how to install batteries in the remote control.

Remote Control Functions

Basic Remote Operations

Explains power, mute, volume adjustment, and direct input selection commands.

Advanced Remote Features

Covers direct input access by number and programming universal remotes.

Terms and Conditions of Sale

General Sales Terms and Order Process

Outlines the scope, order process, title, and delivery terms for product sales.

Pricing, Payment, and Acceptance Policies

Details pricing policies, payment terms, and product acceptance criteria.

Warranty and Liability Limitations

Limitation of Liabilities

Excludes liability for indirect, special, or consequential damages.

Terms of Sale Provisions

Covers default, assignment, confidentiality, and miscellaneous legal clauses.

Limited Warranty Information

Warranty Coverage and Service Process

Details warranty terms, repair/exchange options, and how to obtain service.

Warranty Exclusions and Disclaimers

Lists conditions not covered by warranty and disclaims implied warranties.

Legal Disclaimers and Copyright

Warranty Limitations and Data Protection

Further limits warranty claims regarding costs, data, and repair capabilities.

Copyright and Trademarks

States copyright year and identifies NuForce trademarks.