How to Use Product
E5
How to Use Product
- How to use thermal function
Separate the power cord from
the power outlet after use.
Press the channel 2 start/stop
button (CH2) to finish the
operation while operating.
It is automatically stopped
in the set time (30 minutes)
TUFQ
TUFQ
Notice
How to use thermal function
TUFQ
TUFQ
TUFQ
i
Press the power switch on the
side of the power cord
connection unit to turn on the
product.
TUFQ
Connect the power cord to
the back side of the product,
and connect it to the power
outlet.
Check out the working
voltage before use.
TUFQ
Press the thermal function
start/stop button (HEAT) to
start the thermal function.
Introduction
·Do not use it for other usages than the described purposes of uses.
·Check out the working voltage before use.
i
HEAT
M1 M2
LH
M
L F
AUTO
TIME
CH2CH1
CH2
Caution
Press the start/stop button to
finish the operation, turn off
the power switch, and
separate the power cord from
the power outlet.
All the cords should be
separated while moving the
product. Otherwise, it may
cause the damage of the
product.
It may cause an error if the
product is turned on when the
product is not used.
ON
Power
OFF
ON
Power
OFF
HEAT
M1 M2
LH
M
L F
AUTO
TIME
CH1 CH2
HEAT
LH
M
CH2 CH1
To Next Page
Loading...
