MAGNUM
Page 16
Why is SAFETY important to You?
3 BIG REASONS:
* ACCIDENTS DISABLE AND KILL
* ACCIDENTS COST
* ACCIDENTS CAN BE AVOIDED
FORWARD
This Safety Manual is intended to point out some of the basic safety situations which
may be encountered during the normal operation and maintenance of your driveline
system and to suggest possible ways of dealing with these conditions. This manual is
not a substitute for the manufacturer’s manual(s).
Additional precautions may be necessary depending on attachments used and
conditions at the worksite or in the service area. The manufacturer has no direct
control over machine application, operation, inspection, lubrication, or maintenance.
Therefore, it is YOUR responsibility to use good safety practices in these areas.
The information provided in this manual supplements the specific information about
your machine that is contained in the manufacturer’s manual(s). Other information
which may affect the safe operation of your machine may be contained on safety
signs, in vocational-agricultural and extension training materials, or in insurance
requirements, employer’s safety programs, safety codes, local, state/provincial, and
federal laws, rules, and regulations.
IMPORTANT: IF YOU DO NOT HAVE THE MANUFACTURER’S MANUAL(S) FOR
YOUR PARTICULAR MACHINE, GET A REPLACEMENT MANUAL FROM YOUR
EMPLOYER, EQUIPMENT DEALER, OR FROM THE MANUFACTURER OF YOUR
MACHINE. KEEP THIS SAFETY MANUAL AND THE MANUFACTURER’S
MANUAL(S) WITHIN THIS MACHINE. READ AND UNDERSTAND THE
MANUFACTURER’S MANUAL(S).
A WORD TO THE USER/OPERATOR
It is YOUR responsibility to read and understand this safety manual and the
manufacturer’s manual(s) before operating your equipment.
In reading this manual, you will note that any illustration depicting an unsafe work
procedure or situation is labeled both with the words “wrong” and the mark of an
on the illustration. Each illustration is also numbered and the same number appears
in the text in parenthesis. This number is placed at the end of the written text that
refers to the illustration.
Remember that you are the key to safety. Good safety practices not only protect you
but also protect the people around you. Study this manual and the manufacturer’s
manual(s) for your implement. Make them a working part of your safety program.
Practice all other usual and customary safe working precautions and above all:
REMEMBER, SAFETY IS UP TO YOU
YOU CAN PREVENT SERIOUS INJURY OR DEATH
To Next Page
Loading...
Need help?
General