- 7 -
FAQ2
2. Why do I have to switch the ON/OFF button on the bottom to wake up
the mouse every time?
In general, you don't need to switch the button to reconnect. If the computer is in
a hibernation state, please wake up the computer rst and then press any key or
scroll the trackball to wake up the mouse.
(2) Use a humid cloth to clean the trackball, the surface of the inner trackball
housing, and the sensor. Then, use a cotton swab to clean the dust on three
white rollers.
Note:
Don't clean the mouse and trackball with alcohol or wet wipes containing
alcohol.
When you clean near the optical sensor, please wipe it carefully to avoid
damaging it.
To Next Page
Loading...
