PIE1045 - Indice B – Mars 2020 29/76
Built-in 2.0” TFT colour screen
3 levels: Low / Medium / High
PIR sensors detection distance
Approximately 20m (65ft.)
PIR sensors detection angle
120° (Central sensor: 60° - Side sensors: 30° each)
Photo / Video / Photo + Video
24MP (5640x4232) / 20MP (5120x3840) / 16MP
(4608x3456) / 12MP (4032x3024) / 10MP (3648x2736) /
8MP (3264x2448) / 5MP (2592x1944) / 3MP
(2048x1536) / 2MP (1920x1440)
Programmable from 1 to 3 photos per trigger
FULL HD 1296P (1728x1296) / FULL HD 1080P
(1920x1080) / HD (1280x720) / WVGA (848x480) /
VGA (640x360)
Programmable from 5 to 180 seconds
Between 0.2 and 0.6 second
8xAA (alkaline or rechargeable Ni-MH)
In Setup mode, the camera will automatically power off
after 2 minutes without any press on the keypad.
USB 2.0 port / SD card slot / DC port / AV port
Weight (without batteries)
Android / iOS – Application’s name: PIE1045
10. Troubleshooting
Should your product stop working or develop a fault, first read this guide over, and then
check the batteries and replace/recharge them if necessary.