Num'axes PIE1048 - Page 25

PIE1048 - Indice A – Juillet 2020 25/88
Photo resolution
16MP (4608x3456) / 12MP (4000x3000) / 8MP (3264x2448) /
5MP (2592x1944) / 3MP (2048x1536) / 1MP (1280x960)
Higher resolution produces better quality photos but creates
larger files that take up more of the SD card capacity (fills up
faster).
Multi-shot
1 photo / 2 photos / 3 photos
You can program 1 up to 3 photos per trigger
Video resolution
FULL HD (1920x1080) / HD (1280x720) / 720x480 /
VGA (640x480) / QVGA (320x240)
Higher resolution produces better quality videos but creates larger
files that take up more of the SD card capacity (fills up faster).
Video length
Default setting: 10 seconds
Programmable from 5 seconds up to 10 minutes
(by 1-second increments from 05 up to 59 seconds /
by 1-minute increments from 1 up to 10 minutes)
Audio recording
on the videos
ON / OFF
Allows you to activate or deactivate the audio recording on the
videos.
PIR interval
Default PIR interval: 20 seconds
Programmable from 5 seconds up to 60 minutes
(by 1-second increments from 05 up to 59 seconds /
by 1-minute increments from 1 up to 60 minutes)
Allows you to set the desired time interval between photos/videos
when motion is detected. This function avoids taking too many
photos / videos.
Example: if the PIR interval is set to 01 minute, the camera will
wait 1 minute between each photo/video recording even if motion
is detected.
PIR sensor sensitivity
Low / Medium / High
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference
between body heat and outdoor temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and
environment temperature are hard to tell by the camera, the
recommended setting is high.