EasyManua.ls Logo

Num'axes PIE1048 - Manual Photo Capture; Manual Video Recording; Photo and Video Playback; Deleting Files

Num'axes PIE1048
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PIE1048 - Indice A Juillet 2020 28/88
6.4. Manual capture of a still photo
- Slide the switch to the TEST position.
- Press the DOWN button then press the SHOT button to take a picture.
6.5. Manual capture of a video clip
- Slide the switch to the TEST position.
- Press the UP button then press the SHOT button to start recording a video clip.
Press the SHOT button again to stop recording.
6.6. Photo/video playback on the LCD screen
- Slide the switch to the TEST position then press the REPLAY button to enter the
Playback mode.
- Press the UP and DOWN buttons to navigate the recorded photos/videos.
- A Zoom feature is available for the still photos. Press the SHOT button to zoom in and
press the OK button to zoom out.
- Press the OK button to start reading a video then press the OK button again to stop it.
- Press the MENU button to exit.
6.7. Delete photo/video files on the camera
- Slide the switch to the TEST position.
- Press the REPLAY button to enter the Playback mode then press the MENU button. A
list of options appears on the LCD screen.
- Select "Delete selection" (deletes only the selected photo/video) or "Delete all files"
then press the OK button.
- Select "Cancel" or "Delete" then press the OK button.
- Press the MENU button to exit.
6.8. Write-protection
This function can be used to protect some of the recorded files from accidental deletion.
- Slide the switch to the TEST position.
- Press the REPLAY button to enter the Playback mode then press the MENU button. A
list of options appears on the LCD screen.
- Select "Write Protection" then press the OK button.
- To protect one or more files, select "Write-protect current file" or "Write-protect all
files" then press the OK button.
- To remove the protection, select "Unlock current file" or "Unlock all files" then press
the OK button.
- Press the MENU button to exit.

Related product manuals