Num'axes SL1008 - Setting the Time Lapse Mode (TLM)

SL1008 - Indice A 58/200
setting.
• The Minutes digits will be blinking.
• Press the [UP] or [DN] button to increase or decrease the
minute value (00 – 59).
• Press [OK] to save your selection and enter the Month
setting.
• The Month digits will be blinking.
• Press the [UP] or [DN] button to increase or decrease the
Month value (1 – 12).
• Press [OK] to save your selection and enter the Day
setting.
• The Day digits will be blinking.
• Press the [UP] or [DN] button to increase or decrease the
Day value (01 – 31).
• Press [OK] to confirm the Date setting and enter the Year
setting.
• The Year digits will be blinking.
• Press the [UP] or [DN] button to increase or decrease the
Year value (01 – 99).
• Press [OK] to confirm the Year setting. You’ll then see the
word “- dEL –” blinking on the status screen.
• Press the [M] button to exit the Manual programming
mode and go back to the status screen.
Setting the Time Lapse Mode (TLM)
In Time Lapse mode, the camera will take photos automatically