CD MIX-2
- The Leader in DJ Technology
©2001 Numark Industries
- 7 -
http://www.numark.com
LCD DISPLAY FEATURES
1. PLAY - Active while the unit is actually playing a CD.
2. PAUSE - Active when the unit is paused.
3. CUE - Flashing when the unit is setting a cue point. Lit continuously when the unit is paused at a cue point.
4. PROGRAM - Used for pre-programming the track order to automatically be played by the unit. This is a great
function if you need to leave the CD player alone.
5. TIME MODE -
(Elapsed) is for showing time as it is taking place.
(Remain) shows how much time is left on a particular track. This function is controlled by the TIME BUTTON.
6. SINGLE - Shows when the unit is set to play just one track at a time. When this is not lit, the CD will play
continuously through all tracks. This function is controlled by the SING/CONT BUTTON.
7. PITCH - Is lit when the PITCH BUTTON is active.
8. TIME BAR - Shows either time remaining or elapsed depending on the setting of the TIME BUTTON.
9. PITCH - Shows the percentage change in pitch.
10. TRACK - Shows the current track that the unit is playing.
11. MINUTES - Shows the minutes elapsed or remaining depending on mode setting.
12. SECONDS - Shows the seconds elapsed or remaining depending on mode setting.
13. FRAMES - The CD Player breaks down a second into 75 frames for accurate cueing. This shows the frames
elapsed or remaining depending on mode setting.
14. LOOP- Indicates when loop is actively playing
15. RELOOP- Indicated when “LOOP IN” and “LOOP OUT” have been set and a loop is available for play.
To Next Page
Loading...
Need help?
General
