Need help?Do you have a question about the Numark CDN77usb and is the answer not in the manual?
Turns the unit on/off. Recommended to power off before disconnecting external power.
Ejects the CD. No effect if a CD is currently playing.
Connect USB drives for MP3 playback. Supports FAT16/FAT32 file systems.
Selects between CD and USB sources. Confirmed by pressing the TRACK KNOB.
Toggles between folder and file views for MP3 navigation.
Selects tracks and folders. Can skip 10 tracks at a time when pressed.
Controls track playback, pausing creates a cue point.
Returns to the last start point and pauses. Allows setting cue points.
Activates scratch effect by rotating the JOG WHEEL.
Allows rapid scanning through music using the JOG WHEEL.
Reverses playback of the track. Press again for normal playback.
Activates braking effect, slowing playback before stopping.
Scans rapidly through the track when activated.
Creates a scratch effect on the audio.
Allows hearing the current frame repeatedly when paused.
Sets the start point of a loop during playback.
Sets the end point of a loop and starts playback.
Plays the track immediately from the beginning of a loop.
Sequence tracks to play continuously. Supports adding and deleting tracks.
Plays the created sequence of tracks.
Playback stops at the end of each track.
Tracks play one after another without interruption.
Track plays from cue point when crossfader moves towards player.
Start/pause playback with a momentary switch.
Pause playback by holding switch, resume by releasing.
Switches display between elapsed, remaining track, and total time.
Scrolls through ID3 tags (Title, Album, Artist) of selected files.
Adjusts the pitch fader range (±4%, 8%, 16%, 100%).
Adjusts overall pitch and tempo of music.
Temporarily adjusts pitch and tempo up to ±16%.
Locks musical key while adjusting tempo.
Manually enter BPM by tapping or automatically detect tempo.
Sets the unit's voltage to match the location's power supply.
Port for connecting the supplied power cord.
Connects the CD player to the controller unit using included cables.
Line level outputs for connecting the CD player to a mixer.
Enables fader start features when connected to a compatible mixer.
Shows when the unit is currently playing a track.
Lit when the unit is paused at a cue point.
Shows whether tracks are playing from CD or a connected USB device.
Displays the current track or folder number, or program number.
Displays total tracks on CD/USB or folders in Folder View.
Shows minutes, seconds, and frames for time tracking.
Indicates if elapsed, remaining track, or total time is displayed.
Visual representation of elapsed or remaining time.
Shows Single or Continuous Play mode.
Indicates when a loop has been programmed.
Shows the tempo in beats per minute (BPM).
Shows the percentage change in pitch.
Indicates when the Master Tempo feature is engaged.
Indicates that a program of tracks is currently playing.
Displays folder or file names when navigating MP3s.
Shows the type of ID3 tag displayed in the TEXT DISPLAY.
The range of audible frequencies the unit can reproduce.
Total Harmonic Distortion, measuring signal purity.
Signal-to-Noise Ratio, indicating audio clarity.
The difference between the loudest and quietest sounds.
The maximum voltage output from the unit.
Measures how well stereo channels are isolated.
Ensures equal volume levels between stereo channels.
Lists compatible disc formats like CD, CD-R, CD-RW, and MP3 CDs.
Available pitch adjustment ranges: ±4%, 8%, 16%, or 100%.
The amount of electrical power the unit consumes during operation.
Specifies the required AC voltage and frequency for operation.
Physical size (width, depth, height) of the CD player and controller.
The weight of the CD player and the controller.
To Next Page
General
