SETUP & INSTALLATION
This mixer was designed to be placed between turntables and table top CD players. It is important that
there is at least ¼" (7mm) between the mixer and the turntables or CD players to prevent damage to the
equipment and to reduce unwanted system noise.
There are many variations of these setups. Find the best setup that works for your mixing style by
experimenting with different placements. It is strongly recommended that the top mixer surface and the
top flat surface of the relative be at the same level.
PAGE 6SETUP & INSTALLATION
Setup Style 1 (traditional)
Best For:
Long mixes and blending
techniques
¼" ¼"
¼" ¼"
Setup Style 2 (battle style, scratching)
Best For:
Scratching, cutting and aggressive
mixing techniques
85 mm
Mixer
Mixer
To Next Page
Loading...
Need help?
General
