Numark NS6 II User Manual

4
2. Connect and Start DJing!
Follow this sequence of steps whenever you use NS6II:
1. Make sure all devices are off and all faders and gain knobs are set to "zero."
2. Connect input sources (microphones, turntables, CD players, etc.) to the NS6II.
3. Connect output devices (power amplifiers, sub-mixer, recorders, etc.) to the NS6II.
4. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) NS6II, (3) output devices.
• When ending a session, turn off (1) output devices, (2) NS6II, (3) input sources.
5. Connect the NS6II to your computer with the USB cable (included) and to your
headphones.
6. Open Serato DJ and go! For more information on how to use Serato DJ with NS6II, visit
serato.com/dj/support and select Numark NS6II.
Important:
• Touch the platters to calibrate the touch-sensitive circuitry before using NS6II.
• When reconnecting the NS6II to your computer, the NS6II will recall the previous positions
of the software (e.g., Pitch, effects parameters, etc.). Be mindful of this before playing a
track.
Connection Diagram
Items not listed under Introduction > Box Contents are sold separately.
Computer(s)
Microphone
House Amp
Power
CD Player Turntable Booth Amp
Headphones
(front panel)
Rear Panel

Numark NS6 II Specifications

General

Brand	Numark
Model	NS6 II
Category	DJ Equipment
Language	English