EasyManuals Logo

Numatic NX300 User Manual

Numatic NX300
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
20
10. DISTRIBUTOR TAKE-BACK / DISPOSAL
On the basis of Battery Directive, the manufacturers take responsibility for  nancing collection, treatment and recycling
of batteries used in devices. To this end, batteries must be handed over for disposal to the collection systems
established for this under national law. Disposal of batteries together with household waste is prohibited; batteries must
be collected separately according to type.
Return the battery free of charge to your NUMATIC servicing dealer for disposal or hand it over to an appropriate public
collection point.
11. CHARGING BATTERIES
The charger is intended for use only on  at surfaces, place horizontally on  oor or work surface. The charger is intended for use
with the detachable power cord supplied, the power unit is capable of operating at di󰀨 erent voltages without user adjustment. If
the charger is damaged or does not charge anymore, please return to service centre.
Charging Procedure:
Ensure the battery is fully inserted into the charger.
Fit the mains power cord to charger and suitable power supply.
Please Note: If the battery is above its optimum charging temperature (due to ambient temperature or it if was recently discharged)
the charger LED will illuminate on/o󰀨 RED for a maximum of 40 minutes whilst the battery temperature falls to an acceptable level for
charging to begin.
The LED should show RED to indicate charging.
Once fully charged the LED will show GREEN.
If power is supplied to the charger with no battery  tted the LED will show GREEN to indicate STAND-BY status.
CAUTION!
Check the mains cord regularly for any sign of damage.
Do not use damaged devices.
If the mains cord of the charger is damaged, it must be replaced by an original NUMATIC INTERNATIONAL cord available from
the manufacturer or service agent.
12. WARRANTY
Lithium-Ion Battery Warranty
Warranty: Commercial Use
a. Batteries are warranted (3 Year) providing all battery care rules are followed
b. To claim warranty the following details must be supplied
i. Serial number of the machine
ii. Battery date code
iii. Date purchased
iv. Proof of Purchase
v. Maintenance history and charging regime
Failure to use the correct Numatic charger will void your warranty.
Spare Parts
Part No. SPARES & ACCESSORIES Part No. SPARES & ACCESSORIES
911334 LITHIUM BATTERY CHARGER 912363 CHARGER CABLE (SOUTH AFRICAN)
912365 CHARGER CABLE (UK) 912360 CHARGER CABLE (AUSTRALIAN)
912361 CHARGER CABLE (EURO) 912362 CHARGER CABLE (NORTH AMERICAN)
912364 CHARGER CABLE (SWISS)

Other manuals for Numatic NX300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Numatic NX300 and is the answer not in the manual?

Numatic NX300 Specifications

General IconGeneral
BrandNumatic
ModelNX300
CategoryScrubber
LanguageEnglish

Related product manuals