Do you have a question about the Nuna demi next and is the answer not in the manual?
Weight capacity | 50 lbs |
---|---|
Harness type | 5-point harness |
Suspension | All-wheel suspension |
Compatibility | Compatible with Nuna PIPA series car seats |
Folded dimensions | 24 L x 23.5 W x 35 H (inches) |
Recline positions | Multiple |
Car seat compatibility | Yes, with Nuna PIPA series |
Usage | Birth to 50 lbs |
Dimensions (folded) | 24 L x 23.5 W x 35 H (inches) |
Seat Back Height | 20" |
Seat Width | 12 inches (30.5 cm) |
Wheel Type | rubber wheels |
Canopy | UPF 50+ canopy |
Storage Basket | Large under-seat storage basket |
Register your product online or via mail using model number and manufacture date for warranty and support.
Details on Nuna's custom product warranty, its duration, and required proof of purchase.
Contact details for customer service regarding parts, service, or warranty inquiries.
Essential safety practices including supervision, choking hazards, and use of original parts.
Maximum weight and height for child and load capacity for storage basket and pocket.
Warnings against overloading, improper folding, unauthorized accessories, and risks like finger entrapment.
Guidelines for keeping child in view, drying fabric, checking attachments, and avoiding misuse by children.
Caution against heat exposure, damp storage, and unauthorized product modifications.
Restrictions on child capacity, use on stairs, and preventing children from standing on the footrest.
Information on magnets in the buckle for users with specific medical concerns.
Rules for rider board use, including weight limits, supervision, and proper child positioning.
Step-by-step instructions to unfold and secure the stroller frame.
Guide for attaching rear fenders for twin and double mode configurations.
Instructions for correctly attaching and removing the stroller's rear wheels.
Instructions for correctly attaching and removing the stroller's front wheels.
Steps to clip and zip the stroller canopy onto the seat.
How to attach, remove, and position the arm bar for folding.
Procedure for attaching the stroller/sibling seat in forward or rear-facing modes.
Detailed steps for buckling and adjusting the child's harness for a snug fit.
Guidance on moving upper harness buckles for optimal fit and safety.
Instructions for opening, closing, and attaching the protective canopy.
Guide to changing the stroller handle height across its four available positions.
Instructions for raising and lowering the calf support to two different positions.
How to change the backrest angle using the recline adjustment button.
Steps to detach the stroller's seat insert by releasing velcro and harness.
Instructions for operating the rear wheel brake lever to stop and release the stroller.
How to change the stroller's suspension for rough or smooth terrain.
Instructions for using the front swivel locks on uneven surfaces for stability.
Comprehensive steps for folding the stroller, including handle and latch adjustments.
Visual guide to various ways to configure the stroller for one child.
Visual guide to various ways to configure the stroller for two children.
Visual guide to various ways to configure the stroller for two children side-by-side or tandem.
Prohibits rear-facing seating on lower mount and specific adjustments with multiple seats.
Restriction on the infant carrier handle's vertical position when on the lower mount.
Instructions for attaching the rider board to the stroller frame.
Steps to fold the stroller while the rider board is attached.
Procedure for securing the stroller/sibling seat onto the stroller frame.
Guide on how to fit and use the rain cover with the stroller/sibling seat.
Instructions for attaching the bassinet to the stroller frame.
Steps to attach car seat post adapters and the infant carrier.
Steps to assemble and attach the car seat ring adapter and infant carrier.
Method for cleaning stroller frame and plastic parts with a damp cloth.
Routine cleaning for wheels and guidelines for storing the stroller.
Advice on fabric care, checking for wear, and ensuring product safety.